Measurement | Control | Dosing | Disinfection

Chlorine Sensor MCS4

Chlorine sensor with membrane-covered, amperometric 3-electrode system.

For the measurement of free inorganic chlorine with reduced pH dependence, also in seawater.

Product description:

Measurement: NaClO (sodium hypochlorite), Ca(OCl)₂ (calcium hypochlorite),Cl₂ (chlorine gas), electrolytically generated chlorine
Calibration: at the controller, via analytical chlorine determination by DPD-1 method,
Interferences: 75 % of ClO₂-concentration, 80 % of O₃–concentration, combined chlorine may increase the measuring value
pH range: 4 ... 9,
Pressure range: 0 ... 3.0 bar, no pressure surges and/or fluctuations,
Temperature range: 5 ... 45 °C,
Integrated automatic temperature compensation,
Response time: T90 approx. 2 min.,
Flow rate: approx. 30 l/h, low flow-dependence,
Shaft length: standard 175 mm, mA-Version 220 mm,
Connection: standard 4-pole plug, mA-version: 2-pole terminal or M12-male,
Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

Areas of application:

• Fresh water and sea water at 10 μS/cm , 50 mS/cm, surfactants are partially tolerated

Scope of supply:

• MCS4: sensor, membrane cap, electrolyte

DOWNLOAD - 2016 MWC Chlorine Sensor MCS4 / Order- and Technical Data Sheet
03_MWC Chlorine Sensor MCS4.pdf
PDF-Dokument [331.9 KB]

DOWNLOAD - 2016 MWC Chlorine Sensor MCS4 / Instruction Manual
103_MWC Instruction Manual MCS4.pdf
PDF-Dokument [663.7 KB]

Logout Seite bearbeiten