Measurement | Control | Dosing | Disinfection
Measurement | Control | Dosing | Disinfection

Chlorine Sensor MCP2.1 & MCP3

Chlorine sensor with membrane-covered, amperometric 3-electrode system. 

For the measurement of total chlorine with greatly reduced pH dependence, also in seawater.

Product description:

  • Measurement: NaClO (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine
  • Calibration: at the controller, via analytical chlorine determination by DPD-4 method (DPD-1 + DPD-3),
  • Interferences: ClO2 is registered with 100 %, O3 is measured with a slope of approx. 130% (factor 1.3 with regard to the chlorine slope)
  • Resolution: depending on the sensor type 0.1 ... 0.001 ppm,
  • pH range: 4 ... 12 (linear decrease with approx. 5 % per increasing pH-unit)
  • Pressure range: 0.5 bar, no pressure surges and/or fluctuations,
  • Temperature range: 5 ... 45 °C,
  • Sensor with automatic temperature compensation
  • Response time: T90 approx. 2 min.,
  • Flow rate: approx. 30 l/h, low flow-dependence,
  • Shaft length: 175 mm, 195 mm, 205 mm,
  • Material: microporous hydrophilic membrane, PVC-U, Peek, stainless steel 1.4571 

 

Areas of application:

• Swimming-pool-, drinking- and sea water, surfactants are partially tolerated; special electrolyte for the use in sea water

Scope of supply:

MCP2.1, MCP3: sensor, membrane cap, electrolyte

DOWNLOAD - 2016 MWC Chlorine Sensor MCP2.1 and MCP3 / Order- and Technical Data Sheet
04_MWC Chlorine Sensor MCP2.1 and MCP3.p[...]
PDF-Dokument [328.2 KB]
DOWNLOAD - 2016 MWC Chlorine Sensor MCP2.1 and MCP3 / Instruction Manual
104_MWC Instruction Manual MCP2.1_MCP3.p[...]
PDF-Dokument [721.5 KB]
Druckversion Druckversion | Sitemap Diese Seite weiterempfehlen Diese Seite weiterempfehlen
© 2010 MWC Water Controls a brand of "Morguen Group" | Ravensburg / Germany | Istanbul / Turkey | Shanghai / China | Tel: +90 536 989 7618 | info@morwater.de |

Anrufen

E-Mail

Anfahrt