Measurement | Control | Dosing | Disinfection

Chlorine Sensor MCN1.1

Checks for the absence of chlorine in drinking water in order to protect equipment.

Sensor inspection interval up to 4 weeks.

Product description:

Measurement: NaOCl (sodium hypochlorite),Cl₂ (chlorine gas), electrolytically generated chlorine,
Examination: by means of analytic determination of chlorine by DPD 1 method. Calibrate the sensor with chlorinated water, establish a separate measurement circuit if required,
Interferences: ClO₂, O₃, bound chlorine may increase the value measured, reducing agent may cause slope loss,
Resolution: 0.001 ppm,
pH range: 6.5 ... 9,
Pressure range: 0 ... 0.5 bar, no pressure surges and/or fluctuations,
Temperature range: 5 ... 40 °C
Integrated automatic temperature compensation,
Response time: T90 approx. 2 min,
Flow rate: approx. 30 l/h, low flow dependence,
Shaft length: standard 175 mm, mA version 220 mm,
Connection: standard 4-pole plug, M12 male,
Material: PVC-U, PEEK, stainless steel 1.4571, microporous membrane

Areas of application:

• Check for the absence of chlorine in water

Scope of supply:

• MCN1.1: sensor, membrane cap, electrolyte

DOWNLOAD - 2016 MWC Chlorine Sensor MCN1.1 / Order- and Technical Data Sheet
06_MWC Chlorine Sensor MCN1.1.pdf
PDF-Dokument [268.4 KB]

DOWNLOAD - 2016 MWC Chlorine Sensor MCN1.1 / Instruction Manual
106_MWC Instruction Manual MCN1.1.pdf
PDF-Dokument [748.7 KB]

Logout Seite bearbeiten