Measurement | Control | Dosing | Disinfection
Measurement | Control | Dosing | Disinfection

Chlorine Sensor MCC1

Chlorine sensor with membrane-covered, amperometric 3-electrode system. 

For the measurement of free chlorine with greatly reduced pH dependence, also in seawater.

Product description:

  • Measurement: NaOCl (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine, and organic combined chlorine based on iso-cyanuric acid (tested up to an iso-cyanuric acid concentration of 500 mg/l),
  • Calibration: at the controller, via analytical chlorine determination by DPD 1 method. Observe the iso-cyanuric acid concentration when determining the free chlorine.
  • Interferences: ClO2 is 100 % detected, O3 is detected,
  • pH range: 4 ... 12, greatly reduced pH dependence,
  • Pressure range: 0 ... 0.5 bar, no pressure surges and/or fluctuations,
  • Temperature range: 5 ... 45 °C,
  • Integrated automatic temperature compensation,
  • Response time: T90 approx. 2 min.,
  • Flow rate: approx. 30 l/h, low flow dependence,
  • Shaft length: standard 175 mm, mA version 220 mm,
  • Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

 

 

Areas of application:

• Fresh water and seawater; surfactants are tolerated in part; a special electrolyte is used for seawater 

Scope of Supply:

• MCC1: sensor, membrane cap, electrolyte for use in fresh water use

DOWNLOAD - 2016 MWC Chlorine Sensor MCC1 / Order- and Technical Data Sheet
02_MWC Chlorine Sensor MCC1.pdf
PDF-Dokument [307.0 KB]
DOWNLOAD - 2016 MWC Chlorine Sensor MCC1 / Instruction Manual
102_MWC Instruction Manual MCC1.pdf
PDF-Dokument [759.0 KB]
Druckversion Druckversion | Sitemap Diese Seite weiterempfehlen Diese Seite weiterempfehlen
© 2010 MWC Water Controls a brand of "Morguen Group" | Ravensburg / Germany | Istanbul / Turkey | Shanghai / China | Tel: +90 536 989 7618 | info@morwater.de |

Anrufen

E-Mail

Anfahrt